Selected Items (0)

Facebook Share Button Twitter Share Button

Search


Show results in new page:

Hours:
Mon - Thur
8am - 4:30pm ET
kem-tron logo
Electronic Manufacturing Distribution Since 1989
Holiday Closures:
Dec 25-26 and Jan 1


EDU2AE-TOP-Expand
EDU2AE-TOP-Expand EDU2AE/TOP w/ Expand software for remote programming via USB port & PC
In Stock: 0 (Available To Order)
Price: Request Quote
Add to order/quote

EDU2AE-TOP-Expand



Torque Controller

The Expand version offers all the functionality of the EDU2AE/TOP with the addtion of a USB flash drive (for uploading and downloading data) and special Expand software for your PC. Now you can set the controller parameters from the comfort of your chair and then easily download them via the USB into the controller. With this new technology an infinite number of programs can be easily created and stored for future production requirments!

Main Features of the EDU2AE/TOP/Expand:

  • One controller for a torque range of 2.6 to 442 in-lbs, depending on driver used.
  • Easy to program user interface screens.
  • Eight independant P-sets; with one PLUTO Driver you can replace up to 8 conventional screwdrivers.
  • Each program can be adjusted: Torque, Speed, Hard/Soft Joint, Number of Screws to be tightened, Number of Rejects allowed, Minimum screwing time, Maximum screwing time, Ramp (slow start), Auto-reverse, Program sequence, Soft stop.
  • Password protected.
  • Statistics menu with summary of number of screws, and the number of assemblies completed.
  • 15 input and 11 output connectors: all functions can also be controlled remotely.
  • Serial port for retreival of rundown data.
  • Optional Switch box or Socket/Bit tray.
  • RS232 Serial Port for live data stream reporting
  • PC programming (USB Port): it is possible to set, change and save all parameters through our new "EDU EXPAND" software for PC. It is also possible to upload via USB drive all parameters/programs previously set on "EDU EXPAND". Just connect your USB to the port and recall the desired programs on the menu. The programs set on control unit can be downloaded on USB and recalled on another unit equipped with the Expand package.
  • Saving/programming on mini USB flash drive (Back Panel): you can now save the results of each screwing operation directly on USB pen drive!

User definable parameters:
  1. Driver Model
  2. Torque level adjustment: 2.6 to 442 in-lbs (tool dependent)
  3. Joint type (HARD or SOFT) selects RPM profile
  4. Break Time: down shift speed from pre-torque to final toque when in the Hard Joint RPM profile
  5. Ramp Time: select from 0.2 to 3.0 Seconds
  6. Speed: tool dependent
  7. Minimum Time: select from 0.1s to MAX - 0.1s. Torque reached before this time will not activate torque output signal.
  8. Maximum Time: select from MIN + 0.1 s to 20 sec. If torque is not reach before the MAX time the screwdriver will stop and an error message will be displayed.
  9. Reverse:
  10. Reverse Time:
  11. Reverse Torque:
  12. Language: English, Italian, German, Spanish (French and Portuguese on request)
  13. Thread cutting programmable in 1/2 second.
  14. Rotation: Left or Right
  15. Change password.
  16. Password On or Off.
  17. Calibration
  18. Compensation
  19. Unit: In/lbs or Nm.
  20. Torque: Min Setting
  21. Torque: Max Setting
  22. Number of Screws
  23. OK/ESC
  24. Number or Cycles

Items that ship with this unit:

  • 110V AC power cord

Details & Specifications


Torque Range: 2.6 - 442 in-lbs (Tool Dependent)
RPM Range: 20 - 1200 (Tool Dependent)
Voltage: 110V
Dimensions: 196 x 170 x h110 mm
Weight: 9 lbs
Repeatability: Joint / profile dependent
Accuracy: Joint / profile dependent
Time Control: Standard
RPM Control: Standard
Current Control: Yes
Screw Counting: Standard
Profile Sequencing: Standard
Parameter Sets: Eight (8)
Torque Settings: Eight (8)